Archiving Emails from IceWarp Mail Server

This tutorial only covers the specifics of archiving an IceWarp mail server. It is assumed that you already have a MailStore Server installation or test installation and are familiar with the fundamentals of MailStore Server. Please refer to the Manual or the Quick Start Guide for more information.

MailStore Server offers several ways to archive emails from an IceWarp mail server, which are described below. If you are not sure which archiving method best suits your company, please refer to the chapter Choosing the Right Archiving Strategy.

Synchronizing Users

MailStore Server offers special support for synchronizing users with an IceWarp Mail Server. Information about setup is available in chapter IceWarp Server Integration of the manual.

Archiving Individual Mailboxes

Using the procedure described below you can archive an individual IceWarp Mail Server mailbox for a specific MailStore user. The archiving process can be executed manually or according to a schedule.

Setup of the Archiving Process

For each mailbox please proceed as follows:

  • Unless you want to archive your own mailbox into your personal user archive, please log on as MailStore administrator. Only a MailStore administrator can archive emails for other users.
  • Click on Archive Email.
  • From the list Email Server under Create Profile select IceWarp Mail Server to create a new archiving profile.
  • A wizard opens to help specify the archiving settings.

  • Select Single Mailbox.
  • Fill out the fields Email Address, Host, Access via, User Name and Password. Click on Test to verify the data entered.

For the IMAP-TLS and IMAP-SSL protocols only: You have the option to ignore SSL security warnings. Generally, these warnings appear if an unofficial certificate is used on the server.

  • Click on Next.
  • If needed, adjust the list of folders to be archived (only available with IMAP), the deletion rules (only available with IMAP), the filter (also only available with IMAP) and the timeout value in seconds. The timeout value only has to be adjusted in specific cases (e.g. with very slow servers).

 

  • Click on Next.
  • If logged on to MailStore Server as administrator, the target archive can be specified at the next step. Select the archive of the user for whom the mailbox is to be archived.

 

  • At the last step, a name for the new archiving profile can be specified. After clicking on Finish, the archiving profile will be listed under Saved Profiles and can be run immediately, if desired.

Archiving Multiple Mailboxes in One Step

Starting with version 10.4, IceWarp Mail Server allows users with the appropriate user privileges to access the mailboxes of other users via IMAP. Once a new user has been created or an existing user has been provided with the corresponding privileges, please proceed as follows:

  • Log on to MailStore Client as MailStore administrator.
  • Click on Archive Email.
  • From the list E-Mail-Server under Create Profile select IceWarp Mail Server to create a new archiving profile.
  • A wizard opens to help specify the archiving settings.

  • Select Multiple Mailboxes.
  • To be able to archive multiple mailboxes, MailStore users along with their email addresses have to be set up in the MailStore user management.

 

  • Under Host enter the name of your IceWarp mail server.
  • Under Access via select the protocol to be used to access the IceWarp mail server. Wherever possible, you should always choose IMAP-TLS or IMAP-SSL.

If you would like to automate the archiving process and access the IceWarp mail server using IMAP-TLS or IMAP-SSL, you should enable the option Ignore SSL Warnings. Otherwise, if an unofficial or self-signed certificate is used on the IceWarp mail server, the automatic execution of the archiving process will fail.

  • Under User Name and Password enter the access data of a user who has access to all IceWarp mailboxes to be archived. With IceWarp Mail this is a user with administrative privileges.
  • Click on Next to continue.

 

 

  • Customize the List of Folders to be Archived, the filter and the Deletion Rules as needed. By default, no emails will be deleted from the mailbox. The timeout value only has to be adjusted as needed (e.g. with very slow servers). Please keep in mind that these settings apply to all mailboxes to be archived.
  • Click on Next to continue.

 

 

  • Select the users whose mailboxes you would like to archive. The following options are available:

All users with a configured email address

Choose this option to archive the mailboxes of all users who are set up in the MailStore user management along with their email addresses.

All users except the following

Using the list below, this feature allows you to exclude individual users (and thereby their IceWarp mailboxes) from the archiving process.

Only the following users

Using the list below, this feature allows you to include individual users (and thereby their IceWarp mailboxes) in the archiving process. Only the mailboxes of users who were explicitly specified will be archived.

Synchronize with directory services before archiving

If this option is enabled, the MailStore user list is synchronized with the configured directory service before every archiving process. This has the advantage that new employees, for example, will be set up as MailStore users automatically before archiving allowing MailStore to archive their IceWarp mailboxes automatically as well. This feature is especially recommended for archiving mailboxes according to a schedule.

  • Finally, you can choose a name for the new archiving profile. Once you click on Finish, the archiving profile will be listed under Saved Profiles and can be executed right away.

Additional information about executing archiving profiles is available in chapter Email Archiving with MailStore Basics.

Archiving All Incoming and Outgoing Emails Directly

IceWarp Mail Server allows you to deliver all emails to a separate IceWarp Mail Server archiving mailbox. From this IceWarp Mail Server archiving mailbox and using the respective archiving profile, the archiving process can be executed with MailStore Server. The emails are distributed among the archives of the corresponding MailStore users.

Step 1: Setup of the IceWarp Mail Server Archiving Feature

To create a central multidrop mailbox to which copies of all incoming and outgoing emails are delivered, IceWarp Mail Server’s archiving feature must first be activated and configured. Please proceed as follows:

  • Log on to IceWarp Server Administrator or IceWarp WebAdmim as administrator.
  • Change to Advanced view.
  • Click on Mail and then on Archive.

  • Under General, activate the archiving feature of your IceWarp Mail Server.
  • Enter an Archive to Directory e.g. C:Archive and optionally a Directory trailer path. IceWarp Mail Server creates a folder structure below the archive directory in the format DomainMailboxDirectory trailer path.
  • Under Options enable Do not archive RSS and Do not archive spam if applicable.
  • Click on Apply to save these settings.

Step 2: Setup of an IceWarp Mailbox to Access the IceWarp Archive

Once the archiving feature has been set up, an IceWarp user with access to the IceWarp archive has to be created. This user is later used by MailStore to retrieve the messages.

  • Log on to IceWarp Server Administrator or IceWarp WebAdmim as administrator.
  • Click on Domains & Accounts > Management.
  • Click on the domain in which you would like to create the new user.
  • Create the new IceWarp user.

 

  • In the Options tab under Mailbox enter the full path of the archive directory specified in step 1 into the field Mailbox path.
  • Click on Apply to finish.

Step 3: Configuration of MailStore Server

  • Start MailStore Client on the computer from which the archiving task is to be initiated according to a schedule. This can be the MailStore Server computer or any other machine. Log on as MailStore administrator using MailStore Client.
  • Click on Archive Email.
  • From the Email Server list under Create Profile select IceWarp Mail Server to create a new archiving profile.
  • A wizard opens to help specify the archiving settings.

 

  • Select Multidrop Mailbox and click OK.
  • Fill out the fields Access via, Host, Username and Password. Click on Test to verify the data entered.

For the TLS and SSL protocols only: You have the option to ignore SSL warnings. Generally, these warnings appear if an unofficial certificate is used on the server.

 

  • Adjust any further settings such as how to handle emails with unknown addresses or asking MailStore to delete emails after they have been archived. The latter option is especially sensible when dealing with mailboxes that are exclusively used for archiving.
  • Click on Next.
  • The timeout value only has to be adjusted on a case-by-case basis (e.g. with very slow servers).

  • Click on Next.
  • At the last step, select a name for the new archiving profile. After clicking on Finish, the archiving profile will be listed under Saved Profiles and can be run immediately, if desired.

 

Attached Files
There are no attachments for this article.
Comments
There are no comments for this article. Be the first to post a comment.
Name
Email
Security Code Security Code
Related Articles RSS Feed
MDaemon Integration
Viewed 2291 times since Tue, Feb 4, 2014
Archiving Emails from Zimbra
Viewed 1806 times since Sat, Jan 11, 2014
Archiving Emails Without Your Own Emailserver
Viewed 1994 times since Fri, Jan 10, 2014
Archiving Emails from MDaemon
Viewed 2775 times since Wed, Feb 5, 2014
Archiving Emails from Kerio Connect
Viewed 3788 times since Sat, Jan 11, 2014
Archiving Emails from Google Apps for Business
Viewed 2169 times since Fri, Jan 10, 2014
IceWarp Server Integration
Viewed 1808 times since Tue, Feb 4, 2014
Kerio Connect Integration
Viewed 1713 times since Tue, Feb 4, 2014
Archiving Emails from a Postfix Based Email Server
Viewed 1635 times since Tue, Feb 4, 2014
MENU