Scanning Starts as Soon as a Document is Placed in the Feeder

Issue

Your sheet-fed scanner starts scanning as soon as you put a document in the feeder. The scan is never sent to the program ( Enterprise Organizer pro ).

Cause

Some WIA scanners set themselves up with Windows so that they will begin scanning as soon as a document is placed in their feeder. However, this prevents our software from receiving the document.

Solution

A simple solution is to change the scanner’s setting that allows it to begin scanning automatically. Go to the Windows Control Panel > "Printers and Other Hardware" > "Scanners and Cameras". Right-click the troublesome scanner and select "Properties". If available, look for a tab labeled "Events". On this tab there should be a combo box listing all possible events for the scanner and the desired action following each event.

The offending event will probably be called something like "Paper loaded into feeder." Select this event in the combo box and then select "Take No Action." If you’re unsure which event is causing the problem you can specify "Take No Action" for every event. Apply your changes when finished.

Now the scanner will not scan automatically when loaded.